- BEMC
- BEMC Detector Operator Manual
- Calibrations
- BPRS
- 01 DB peds R9069005, 9067013
- 02 pedestal(capID)
- 03 tagging desynchronized capID
- 04 BPRS sees beam background?
- 05 ---- peds(softID,capID) & status table, ver=2.2, R9067013
- 06 MIP algo ver 1.1
- 07 BPRS peds vs. time
- 08 BPRS ped calculation using average
- 09 BPRS swaps, IGNORING Rory's finding from 2007, take 1
- 10 -------- BPRS swaps take2, _AFTER_ applying Rory's swaps
- 11 BPRS absolute gains from MIP, ver1.0 ( example of towers)
- 12 MIP gains ver1.0 (all tiles, also BTOW)
- 13 MIP algo, ver=1.1 (example of towers)
- 14 ---- MIP gains ver=1.6 , 90% of 4800 tiles ----
- 15 Broken BPRS channels ver=1.6, based on data from March of 2008
- BSMD
- Run 3 BTOW Calibration
- Run 4 BTOW Calibration
- Run 5 BTOW Calibration
- Run 6 BTOW Calibration
- Run 7 BTOW Calibration
- Run 8 BTOW Calibration (2008)
- BPRS
- Database
- Mapping
- Service Tasks
- Software
- Useful Documents
- DAQ
- Detector Upgrades
- EEMC
- FTPC
- HFT
- L3
- PMD
- RICH
- Slow Controls
- SSD
- SVT
- TOF
- TPC
- Trigger Detectors
BPRS
Submitted by kocolosk on Sat, 2006-07-15 15:13.
Under:
This task has been picked up by Rory Clarke from TAMU. His page is here:
http://www4.rcf.bnl.gov/~rfc/
http://www4.rcf.bnl.gov/~rfc/