-
cpu0: SUNW,UltraSPARC-II (upaid 1 impl 0x11 ver 0xa0 clock 400 MHz)
-
cpu1: SUNW,UltraSPARC-II (upaid 3 impl 0x11 ver 0xa0 clock 400 MHz)
-
SunOS Release 5.6 Version Generic_105181-26 [UNIX(R) System V Release 4.0]
Copyright (c) 1983-1997, Sun Microsystems, Inc.
-
mem = 2097152K (0x80000000)
-
avail mem = 2086993920
-
Ethernet address = 8:0:20:a7:6c:91
-
root nexus = Sun Enterprise 450 (2 X UltraSPARC-II 400MHz)
More detail for the truly interested:
System Configuration: Sun Microsystems sun4u Sun Enterprise 450 (2 X UltraSPARC-II 400MHz)
System clock frequency: 100 MHz
Memory size: 2048 Megabytes
========================= CPUs =========================
Brd | CPU | Module | Run MHz | Ecache MB | CPU Impl. | CPU Mask |
SYS | 1 | 1 | 400 | 4.0 | US-II | 10.0 |
SYS | 3 | 3 | 400 | 4.0 | US-II | 10.0 |
========================= Memory =========================
Memory Interleave Factor = 2-way
Bank | Interlv.Group | Socket Name | Size (MB) | Status |
0 | 0 | 1901 | 256 | OK |
0 | 0 | 1902 | 256 | OK |
0 | 0 | 1903 | 256 | OK |
0 | 0 | 1904 | 256 | OK |
1 | 0 | 1801 | 256 | OK |
1 | 0 | 1802 | 256 | OK |
1 | 0 | 1803 | 256 | OK |
1 | 0 | 1804 | 256 | OK |
========================= IO Cards =========================
Brd | Bus Type | Freq MHz | Slot | Name | Model |
SYS | PCI | 33 | 1 | pciclass,001000 | Symbios,53C875 |
SYS | PCI | 33 | 2 | pciclass,001000 | Symbios,53C875 |
SYS | PCI | 33 | 3 | SUNW,m64B | ATY,GT-B |
SYS | PCI | 33 | 7 | pciclass,068000 |
SYS | PCI | 33 | 7 | pci108e,1001 | SUNW,cheerio |
SYS | PCI | 33 | 7 | pciclass,010000 | QLGC,ISP1040B |
SYS | PCI | 33 | 8 | pciclass,068000 |
SYS | PCI | 33 | 8 | pci108e,1001 | SUNW,cheerio |
SYS | PCI | 33 | 8 | pciclass,010000 | QLGC,ISP1040B |
SYS | PCI | 33 | 9 | pciclass,000000 |
MYSQL Configuration
There are seven production databases servers on onlsun1 on the following ports:
3501, 3502, 3503, 3400, 3401, 3402, 3403.
You can connect to the production databases from onlsun1 using the feedback loop as user starcrew using the follwing command:
mysql --socket=/tmp/mysql.3xxx.sock.
Starting and stopping the Mysql Servers should be done at boot/shutdown time,
if needed to be restarted by hand the scripts can be found as follows:
/online/production/database/config
The production scripts are number according to the Run they represent.
For the production servers use: /etc/init.d/mysql_multi.servers
These are calls to the actual start/stop scripts which can be found in
/online/production/dbAdmin/servers
The databases are as follows:
Port 3501:
- Conditions_rts
- RunLog
- SSignupDev
- Scalers_onl
- Scalers_rts
- ShiftLog
- ShiftSignup
- ShiftSignupBackup
- StarDb
- mysql
|
Port 3502:
- Calibrations_test
- Conditions_bbc
- Conditions_eemc
- Conditions_emc
- Conditions_ftpc
- Conditions_rhic
- Conditions_rich
- Conditions_svt
- Conditions_tof
- Conditions_tpc
- Conditions_trg
- Log_eemc
- RunLog
- RunLog_onl
- mysql
|
Port 3503:
- Calibrations_daq
- RunLog_daq
- mysql
|
Port 3400:
- Conditions_daq
- Conditions_onl
- Conditions_rhic
- Conditions_rich
- Conditions_scalar
- Conditions_svt
- Conditions_tpc
- Conditions_trg
- RunLog
- RunLog_daq
- RunLog_onl
- StarComputers
- StarDb
- mysql
- test
|
Port 3401:
- Conditions_emc
- Conditions_ftpc
- Conditions_rhic
- Conditions_rich
- Conditions_rts
- Conditions_svt
- Conditions_tof
- Conditions_tpc
- Conditions_trg
- RunLog
- RunLog_daq
- RunLog_onl
- StarDb
- mysql
- test
|
|