TOFp-nps


This unit is a network-controlled AC power hub, located in Rack 1B2.

Below is the site specific information. The manufacturer's web documentation is HERE.




...for normal running, it should look like this:


Network Power Switch v3.02        Site: TOFP RACK 1B2 SOUTH PLATFORM

Plug | Name             | Status  | Boot Delay | Password         | Default |
-----+------------------+---------+------------+------------------+---------+
 1   | DAQ_PC           |   ON    |   5  sec   | (defined)        |   ON    |
 2   | RAMP&NIMbins     |   ON    |   5  sec   | (defined)        |   OFF   |
 3   | Thresh_Sys       |   ON    |   5  sec   | (defined)        |   OFF   |
 4   | CAMAC_crate      |   ON    |   5  sec   | (defined)        |   OFF   |
 5   | HVSys            |   ON    |   5  sec   | (defined)        |   OFF   |
 6   | pVPD_LV          |   ON    |   5  sec   | (defined)        |   OFF   |
 7   | TOFp_LV+5        |   ON    |   5  sec   | (defined)        |   OFF   |
 8   | TOFp_LV-5        |   ON    |   5  sec   | (defined)        |   OFF   |
-----+------------------+---------+------------+------------------+---------+

Communication Settings:  9600,N,8,1
Modem Init. String:      ATE0M0Q1&C1&D2S0=1
Modem Disc. String:      (undefined)
Disconnect Timeout:      30 Min
Command Echo:            On
Command Confirmation:    On

"/H" for help.

NPS>