Source files that are used as input to doxygen can be parsed by doxygen's built-in C-preprocessor.

By default doxygen does only partial preprocessing. That is, it evaluates conditional compilation statements (like #if) and evaluates macro definitions, but it does not perform macro expansion.

So if you have the following code fragment

#define VERSION 200
#define CONST_STRING const char *

#if VERSION < 200
  static CONST_STRING version = "2.xx";
  static CONST_STRING version = "1.xx";

Then by default doxygen will feed the following to its parser:

#define VERSION

  static CONST_STRING version = "2.xx";

You can disable all preprocessing by setting ENABLE_PREPROCESSING to NO in the configuation file. In the case above doxygen will then read both statements, i.e:

  static CONST_STRING version = "2.xx";
  static CONST_STRING version = "1.xx";

In case you want to expand the CONST_STRING macro, you should set the MACRO_EXPANSION tag in the config file to YES. Then the result after preprocessing becomes:

#define VERSION

  static const char * version = "1.xx";

Note that doxygen will now expand all macro definitions (recursively if needed). This is often too much. Therefore, doxygen also allows you to expand only those defines that you explicitly specify. For this you have to set the EXPAND_ONLY_PREDEF tag to YES and specify the macro definitions after the PREDEFINED or EXPAND_AS_DEFINED tag.

As an example, suppose you have the following obfuscated code fragment of an abstract base class called IUnknown:

/*! A reference to an IID */
#ifdef __cplusplus
#define REFIID const IID &
#define REFIID const IID *

/*! The IUnknown interface */
  STDMETHOD(HRESULT,QueryInterface) (THIS_ REFIID iid, void **ppv) PURE;

without macro expansion doxygen will get confused, but we may not want to expand the REFIID macro, because it is documented and the user that reads the documentation should use it when implementing the interface.

By setting the following in the config file:

PREDEFINED           = "DECLARE_INTERFACE(name)=class name" \
                       "STDMETHOD(result,name)=virtual result name" \
                       "PURE= = 0" \
                       THIS_= \
                       THIS= \

we can make sure that the proper result is fed to doxygen's parser:

/*! A reference to an IID */
#define REFIID

/*! The IUnknown interface */
class  IUnknown
  virtual  HRESULT   QueryInterface ( REFIID iid, void **ppv) = 0;
  virtual  ULONG   AddRef () = 0;
  virtual  ULONG   Release () = 0;

Note that the PREDEFINED tag accepts function like macro definitions (like DECLARE_INTERFACE ), normal macro substitutions (like PURE and THIS) and plain defines (like __cplusplus).

Note also that preprocessor definitions that are normally defined automatically by the preprocessor (like __cplusplus), have to be defined by hand with doxygen's parser (this is done because these defines are often platform/compiler specific).

In some cases you may want to substitute a macro name or function by something else without exposing the result to further macro substitution. You can do this but using the := operator instead of =

As an example suppose we have the following piece of code:

#define QList QListT
class QListT

Then the only way to get doxygen interpret this as a class definition for class QList is to define:


Here is an example provided by Valter Minute and Reyes Ponce that helps doxygen to wade through the boilerplate code in Microsoft's ATL & MFC libraries:

PREDEFINED           = "DECLARE_INTERFACE(name)=class name" \
                       "STDMETHOD(result,name)=virtual result name" \
                       "PURE= = 0" \
                       THIS_= \
                       THIS= \
                       DECLARE_REGISTRY_RESOURCEID=// \
                       DECLARE_PROTECT_FINAL_CONSTRUCT=// \
                       "DECLARE_AGGREGATABLE(Class)= " \
                       "DECLARE_REGISTRY_RESOURCEID(Id)= " \
                       DECLARE_MESSAGE_MAP = \
                       BEGIN_MESSAGE_MAP=/* \
                       END_MESSAGE_MAP=*/// \
                       BEGIN_COM_MAP=/* \
                       END_COM_MAP=*/// \
                       BEGIN_PROP_MAP=/* \
                       END_PROP_MAP=*/// \
                       BEGIN_MSG_MAP=/* \
                       END_MSG_MAP=*/// \
                       BEGIN_PROPERTY_MAP=/* \
                       END_PROPERTY_MAP=*/// \
                       BEGIN_OBJECT_MAP=/* \
                       END_OBJECT_MAP()=*/// \
                       DECLARE_VIEW_STATUS=// \
                       "STDMETHOD(a)=HRESULT a" \
                       "ATL_NO_VTABLE= " \
                       "__declspec(a)= " \
                       BEGIN_CONNECTION_POINT_MAP=/* \
                       END_CONNECTION_POINT_MAP=*/// \
                       "DECLARE_DYNAMIC(class)= " \
                       "IMPLEMENT_DYNAMIC(class1, class2)= " \
                       "DECLARE_DYNCREATE(class)= " \
                       "IMPLEMENT_DYNCREATE(class1, class2)= " \
                       "IMPLEMENT_SERIAL(class1, class2, class3)= " \
                       "DECLARE_MESSAGE_MAP()= " \
                       TRY=try \
                       "CATCH_ALL(e)= catch(...)" \
                       END_CATCH_ALL= \
                       "THROW_LAST()= throw"\
                       "RUNTIME_CLASS(class)=class" \
                       "MAKEINTRESOURCE(nId)=nId" \
                       "IMPLEMENT_REGISTER(v, w, x, y, z)= " \
                       "ASSERT(x)=assert(x)" \
                       "ASSERT_VALID(x)=assert(x)" \
                       "TRACE0(x)=printf(x)" \
                       "OS_ERR(A,B)={ #A, B }" \
                       __cplusplus \
                       "DECLARE_OLECREATE(class)= " \
                       "BEGIN_DISPATCH_MAP(class1, class2)= " \
                       "BEGIN_INTERFACE_MAP(class1, class2)= " \
                       "INTERFACE_PART(class, id, name)= " \
                       "END_INTERFACE_MAP()=" \
                       "DISP_FUNCTION(class, name, function, result, id)=" \
                       "END_DISPATCH_MAP()=" \
                       "IMPLEMENT_OLECREATE2(class, name, id1, id2, id3, id4,\
                        id5, id6, id7, id8, id9, id10, id11)="

As you can see doxygen's preprocessor is quite powerful, but if you want even more flexibility you can always write an input filter and specify it after the INPUT_FILTER tag.

If you are unsure what the effect of doxygen's preprocessing will be you can run doxygen as follows:

  doxygen -d Preprocessor
This will instruct doxygen to dump the input sources to standard output after preprocessing has been done (Hint: set QUIET = YES and WARNINGS = NO in the configuration file to disable any other output).

Go to the next section or return to the index.

Generated on Thu Feb 5 16:59:07 2004 for Doxygen manual by doxygen 1.3.5