STAR SVT - Technical Drawings

This list is setup/maintained by R. Bellwied, WSU and B.Leonhardt, BNL

Last Update: 3/9/00.
The drawings are listed according to the official SVT drawing tree. For an eps-version of this tree, please click here
All drawings listed in the tree are in DWG format.
The components listed as TBA are still under design.

SVT100 : SVT Detector Assembly

TBA :Endring and Ladder Assembly
- TBA :Ladder Assembly
  - SVT140E1A:Angle Bracket, 22.5 degree, long
  - SVT141E1A:Angle Bracket, 22.5 degree, short
  - SVT142E1B:Angle Bracket, 30 degree, long
  - SVT143E1B:Angle Bracket, 30 degree, short
  - SVT144E1B:Angle Bracket, 45 degree, long
  - SVT145E1B:Angle Bracket, 45 degree, short
  - TBA :Detector Carrier Assembly
    - SVT110D1A:DC long, 7 wafer
    - SVT111E1A:DC long, 6 wafer
    - SVT112E1A:DC long, 4 wafer
    - SVT130D1A:DC short, 7 wafer
    - SVT131E1A:DC short, 6 wafer
    - SVT132E1A:DC short, 4 wafer
    - SVT165C1B:HV board
  - TBA :Electronics Carrier Assembly
    - SVT326E1A:EC short, carbon/epoxy
    - SVT327E1A:EC long, carbon/epoxy
    - TBA:hybrid
    - TBA:flex circuit
    - TBA:wrap-around connector
- TBA :Endring Sub-Assembly
  - SVT129B1A:Stand-off Bracket to Endring (Be)
  - SVT133E1A:Bracket Water Manifold (Weldment)
  - SVT135B1A:Stand-off Bracket to Endring (G-10)
  - SVT115 :Endring Support Assembly Inner
    - SVT119 :Support - Carrier Layer 1
    - SVT122 :Support - Carrier Layer 2
    - SVT113 :Endring Inner Machining
  - SVT116 :Endring Support Assembly Outer
    - SVT120 :Support - Carrier Layer 3
    - SVT123 :Support - Carrier Layer 4
    - SVT124 :Support - Carrier Layer 5
    - SVT121 :Support - Carrier Layer 6
    - SVT114 :Endring Outer Machining
    - TBA :Latching Details
  - SVT134D1B:Spacer Bonding Assembly Ebdring to Endring
    - SVT138B1B:Flange Mtg., Endring/Endring Spacer
    - SVT139B1B:Quadrant, Endring/Endring Spacer
TBA :Water Manifold Assembly
- SVT179B1A:Pin - SVT Support
- TBA:Support Pin Plate
- SVT164B1A:Transition Board
- TBA:Manifold Water Fitting
- SVT333:Manifold Half Weldment
  - SVT329E1A:Manifold Endpiece - Inlet
  - SVT330E1A:Manifold Endpiece - Outlet
  - SVT331D1A:Manifold Shell - Outer
  - SVTD1A:Manifold Shell - Inner

TBA : RDO Box Installation

SVT194D1A:Mounting Plate - RDO boxes
TBA :RDO Box Assembly
- TBA :RDO Box Details, U.Texas
- SVT193D1A:Integral Mounting Plate

TBA: Support Cone Installation

TBA :Air Manifold Installation
- SVT323E1A:Partition - TADR
- SVT324E1A:Air Manifold Plenum, Weldment TADR 1
- SVT324E2A:Air Manifold Plenum, Weldment TADR 2
- SVT325E1A:Air Manifold Plenum, Cover
- TBA :Cooling Air System Schematic
- TBA :Cover Assembly
  - SVT189D1A:Cover Half A
  - SVT190C1A:Cover Half B
TBA :Water Manifold Installation
- TBA :Water Manifold Weldment
- TBA :Cooling Water System Schematic
TBA :Support Cone Assembly
- SVT192E1A:Pin Diode Installation
- Q060EA100:Mechanical Structure
  - Q060DA101E:Small End Flange
  - Q060DA102C:Large End Ring
  - Q060DA103B:Carbon Sandwich Cone
  - Q060DA104A:Connecting Rod
  - Q060DA105B:Connecting Rod Joint
  - Q060DA106:Adjustment Insert of SSD
- SVT181E1A:Beam Pipe Support Assembly
  - SVT180E1C :Kinematic Mount (West, Sliding)
  - SVT146E1C:Kinematic Mount (East, Fixed)
  - SVT182C1A:Support Half, Lower
  - SVT183B1A:Mounting Block, Outer
  - SVT184B1A:Mounting Block, Inner
  - SVT185B1A:Connecting Rod
  - SVT191C1A:Support Half, Upper
  - SVT186B1A:Roller
  - SVT187B1A:Roller Assembly
- SVT161B1A:Roller Assembly, Support Cone
  - SVT162B1A:Hub, Roller
  - SVT163B1A:Sleeve, Roller
SVT174D1A:Cone Adjuster East End
SVT176D1A:Cone Adjuster West End
- SVT160B1A:Adjuster Shaft LH and RH Thread
- SVT166C1A:Adjustment Block, Cone
- SVT167B1A:Horizontal Adjuster Bushing
- SVT168B1A:Pivot Block - LH Thread
- SVT169B1A:Lock-Down Plate IFC
- SVT170D1A:Adjustment Block, IFC
- SVT171B1A:Hoizontal Adjuster Shaft
- SVT172B1A:Lock-Down Plate
- SVT173B1A:Pivot Block, IFC
- SVT175B1A:Pivot Pin 0.500
- SVT177B1A:Pivot Block - Bushed
- SVT178B1A:Horizontal Adjuster Shaft - Sliding