From: Tonko Ljubicic (tonko_at_bnl.gov)
Date: Wed Jan 22 2003 - 20:20:40 EST
>
>
> Tonko Ljubicic wrote:
> >
> >>hello tonko - just FYI we'll be reducing our timeout setting
> >>from 2sec to <<1sec during next wednesday's access....
> >>add'l comments from john below in case you're interested... regards,
> >>bill
> >
> >
> > So it's a hardware issue? I thought it was done in software...
>
> No, it is *not* a hardware issue, it is set in software. If you want to
> test a lower setting *now*, let me know and i'll change it to 0.5 sec so
> you can see how this affects dead times on your side.
Don't change it just now (I'm at home and don't need a call, :-)) but I'll
send you email tomorrow morning (or so...). OK?
>
> >
> > Regarding the L2 accept: you should get it in less than 10ms
> > (normally) and rarely 10-20-30 ms.
>
> is this different from what it was last year?
Yup. Eeeeeeeeeveeeeeeeeeeeryhing is different in Trigger, :-).
-- Tonko
This archive was generated by hypermail 2.1.4 : Thu Jul 24 2003 - 00:39:32 EDT