recent data

Date view	Thread view	Subject view	Author view	Attachment view

From: W.J. Llope (llope_at_physics.rice.edu)
Date: Sat May 03 2003 - 12:40:09 EDT

Next message: Frank Geurts: "pVPD problem (Re: recent data)"
Previous message: Frank Geurts: "TOFp ADC problem? (Re: tof went red in run control, ok now)"
Next in thread: Frank Geurts: "pVPD problem (Re: recent data)"
Reply: Frank Geurts: "pVPD problem (Re: recent data)"

(localmon_to4123046.dat)

Found 0 beam events out of 31356 >>--> ratio = 0

-> all strobe events.

pVPD singles scalers all zero too.

either:
        we lost the pVPD LV supply,
or
        we lost both pVPD FEE boards
or
        the shift crew neglected to power up
                the pVPD HV during the STAR power-up...

geary could you check w/ the shift crew on this?

clearly there's no way i can answer frank's question
(re: the DMA errors) w/ only these strobe events...
anyway, the pedestals look o.k....

-- 
_________________________________________________________
W.J. Llope, Ph.D.                  Res. Assoc. Professor
                 http://wjllope.rice.edu/default.html
                 llope_at_physics.rice.edu
T.W. Bonner Nuclear Lab.     
Rice University, MS-315      
6100 S. Main                       phone: 713-348-4741  
Houston, TX 77005-1892             fax:   713-348-5215

Next message: Frank Geurts: "pVPD problem (Re: recent data)"
Previous message: Frank Geurts: "TOFp ADC problem? (Re: tof went red in run control, ok now)"
Next in thread: Frank Geurts: "pVPD problem (Re: recent data)"
Reply: Frank Geurts: "pVPD problem (Re: recent data)"

Date view	Thread view	Subject view	Author view	Attachment view

This archive was generated by hypermail 2.1.4 : Thu Jul 24 2003 - 00:39:41 EDT