From: Frank Geurts (geurts_at_rice.edu)
Date: Sun Mar 16 2003 - 03:20:07 EST
Hi Petr -- 63/62 or 3.5/3.4 is fine, this is a readout calibration issue
with the flowmeters. We have been aware of this from the moment the
readout started. Thanks for carefully checking those readouts though!
cheers,
Frank
W.J. Llope wrote:
>
>> Delivered-To: llope_at_physics.rice.edu
>> From: Petr Chaloupka <petrchal_at_rcf.rhic.bnl.gov>
>> Date: Fri, 14 Mar 2003 15:21:08 -0500 (EST)
>> Subject: STAR crew: TOF flow rate
>> To: <llope_at_physics.rice.edu>
>> X-Priority: 3
>> Importance: Normal
>> X-MailScanner: Found to be clean
>> Status:
>>
>> Hello,
>>
>> I'm right now the STAR shift crew. I was just checking the TOF gas flow
>> rate. On the paper in the gas room is that the flow rates should be 63
>> and
>> 3.5. After checking the gas I found that the flow rate has changed to 62
>> and 3.4. Since I have no information about how such a change could be
>> significant I decided to let you know about it. Let me, please, know
>> if we
>> should ingnore such a small changes or not. I'll be now checking more
>> often the flow to see if it changes again.
>>
>> Petr Chaloupka - shift crew.
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jul 24 2003 - 00:39:37 EDT