pressure on isob.

Date view Thread view Subject view Author view Attachment view

From: Frank Geurts (geurts_at_rice.edu)
Date: Mon May 19 2003 - 13:01:42 EDT

Geary and/or Zhangbu,
  i got a phone call from SCR: apparently the pressure of the
isobuthane(?) has gone up from 30 to 32psi and according to the current
shiftleader somebody told him that the pressure should not go above
30psi. The pressure history typically is somewhere between 15-20psi.

Zhangbu, could you at some point (or Geary if he's back from CERN) check
the pressure on the bottles and maybe lower it a little.

thanks,
  Frank

Date view Thread view Subject view Author view Attachment view

This archive was generated by hypermail 2.1.4 : Thu Jul 24 2003 - 00:39:42 EDT