From: Geary Eppley (eppley_at_physics.rice.edu)
Date: Mon May 19 2003 - 15:10:33 EDT
Hi Frank,
I won't be back at BNL until 5/22. I don't think the pressure will get
high enough to damage the gauge but if Zhangbu could reduce the pressure a
few clicks it wouldn't hurt. This has to be done slowly and it will take
several hours to see any results.
Geary
On Mon, 19 May 2003, Frank Geurts wrote:
> Geary and/or Zhangbu,
> i got a phone call from SCR: apparently the pressure of the
> isobuthane(?) has gone up from 30 to 32psi and according to the current
> shiftleader somebody told him that the pressure should not go above
> 30psi. The pressure history typically is somewhere between 15-20psi.
>
> Zhangbu, could you at some point (or Geary if he's back from CERN) check
> the pressure on the bottles and maybe lower it a little.
>
> thanks,
> Frank
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jul 24 2003 - 00:39:42 EDT