 |
 |
 |
 |
|
 |
 |
3
3. To change the HV, click on column 4 and type. After typing
the particular value of the voltage make sure that you press
“enter” to finalize the value written. Sliding bars seen on the
left side also can be used to change the voltage.
Now presss “Ramp up down” button to finally
change the voltage of CPV plane. Wait for the
comment “Pedestal Voltage Set=> Successful” seen at the
bottom of fig.2 to change to “Ramping up of voltage
successful”.
4. Congrats you have successfully changed the HV of the CPV
plane.
RAMP UP DOWN
 |